Dual-Gripper, Carbon-Fiber End Effector Increases Robot Productivity
All Axis Robotics has introduced a dual-gripper, carbon-fiber end effector for collaborative robots in the metal fabrication industry.
.jpg;width=70;height=70;mode=crop;format=webp)
All Axis Robotics has introduced a dual-gripper, carbon-fiber end effector for collaborative robots in the metal fabrication industry. Incorporating carbon fiber’s high strength-to-weight ratio into the end effector’s design is said to enable greater payloads, increase speed on the production line, reduce motor and actuator loads, and increase heat resistance.
The primary feature of this carbon fiber end effector is a quick-disconnect interface hub that is said to enable standard metal or wood finishing tools to be coupled to a robot within minutes. The dual-mounting design enables two different sets of grippers to be affixed to the end effector, increasing productivity of the robot movements.Related Content
-
Choosing a Five-Axis Machine Tool With Automation in Mind
While much focus is placed on the machinery that moves parts, the features most important for automating five-axis machining are arguably found in the machine tool itself.
-
Zero-Adjustment Bar Pullers Simplify Turning Automation
Spring-loaded grippers and adjustable programming are enabling bar pullers to fulfill their promise to save time and money in CNC turning automation.
-
Inside the Premium Machine Shop Making Fasteners
AMPG can’t help but take risks — its management doesn’t know how to run machines. But these risks have enabled it to become a runaway success in its market.
