Kennametal
Published

Reshoring Initiative Report Reveals Record High in Reshoring

Despite COVID, reshoring and job numbers have been increasing since 2010, a new report from the Reshoring Initiative shows.

Share

Despite COVID, reshoring numbers were up in 2020. Reshoring and foreign direct investment (FDI) job announcements for 2020 were 160,649, bringing the total jobs announced since 2010 to over 1 million (1,057,054). Also of significant importance, according to the Reshoring Initiative: Reshoring exceeded FDI by nearly 100 percent, the first beat for reshoring since 2013. Additionally, the number of companies reporting new reshoring and FDI set a new record: 1,484 companies. Reshoring will continue to be key to U.S. manufacturing and economic recovery in 2021 and beyond, according to the Initiative.

Graph of Jobs Announced, Reshoring and FDI, Cumulative 2010-2020

Jobs Announced, Reshoring and FDI, Cumulative 2010-2020
Photo Credit: Reshoring Initiative

About the Report

The Reshoring Initiative’s 2020 Data Report contains data on U.S. reshoring and FDI by companies that have shifted production or sourcing from offshore to the United States. The report includes data for 2020, cumulative data from 2010 through 2020 as well as projections for 2021. The report provides data and analysis in 10 categories, ranging from the number of manufacturing jobs gained, to reasons cited for reshoring, to a breakdown of data by industry, country, region and state. See the full report:

Reshoring Initiative 2020 Data Report: COVID Drives Cumulative Jobs Announced Past 1 Million

Key Takeaways from the Report:

  • In 2020, U.S. reshoring set a record of 109,000 jobs and outpaced FDI for the first time since 2013. COVID uncertainty has resulted in companies emphasizing operations in their home countries.
  • In order to make the U.S. less vulnerable, there are now national initiatives to shorten and close supply chain gaps for essential products. The following industries are most likely to benefit: PPE, medical, tech and defense. Medical equipment and PPE are the first responders of new reshoring and FDI, with cases up nearly 2000 percent and jobs up 400 percent from 2019.
  • President Biden is highly prioritizing reshoring but applying different methods than President Trump did. The gaps in Biden’s plans need to be addressed in order to achieve his goal of returning five million more jobs.
  • There is continued growth in efforts by MEPs, EDOs and states to enable reshoring. The Reshoring Initiative is deeply involved in these efforts with its Import Substitution Program (ISP). As a measure of corporate interest, the demand for this service is more than 10 times the rate in 2019.
  • The Reshoring Initiative anticipates 2021 reshoring and FDI job announcements to be near 200,000, up by at least 25 percent.

“We publish this data annually to show companies that their peers are successfully reshoring and that they should reevaluate their sourcing and siting decisions,” said Harry Moser, founder and president of the Reshoring Initiative. “With five million manufacturing jobs still offshore, as measured by our $900 billion/year goods trade deficit, there is potential for much more growth. We call on the administration and Congress to enact policy changes to make the United States competitive again. Our Competitiveness Toolkit is available to help quantify the impact of policy alternatives, including a stronger skilled workforce, competitive corporate tax and regulatory structures and a lower U.S. dollar.”

About the Reshoring Initiative

A 50-year manufacturing industry veteran and retired President of GF AgieCharmilles, Harry Moser founded the Reshoring Initiative to move lost jobs back to the U.S. For his efforts with the Reshoring Initiative, he was named to Industry Week magazine’s Manufacturing Hall of Fame in 2010. Additional information on the Reshoring Initiative and its many sponsoring associations and companies is available at reshorenow.org.

Koma Precision
Paperless Parts
Kennametal
OASIS Inspection Systems
CHIRON Group, one stop solution for manufacturing.
SolidCAM
DN Solutions
Hurco
To any Measurement Question there is an Answer
Kennametal
MMS Top Shops
DN Solutions

Read Next

Vertical Machining Centers

The Cut Scene: The Finer Details of Large-Format Machining

Small details and features can have an outsized impact on large parts, such as Barbco’s collapsible utility drill head.

Read More

3 Mistakes That Cause CNC Programs to Fail

Despite enhancements to manufacturing technology, there are still issues today that can cause programs to fail. These failures can cause lost time, scrapped parts, damaged machines and even injured operators.

Read More
Kennametal