• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
4/6/2005

Air Bearing CMMs

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The Micro-Hite 3D series is equipped with TesaStar probes and PC-DMIS software.  The CMM line has been developed for the entry level price point, says the company.

The Micro-Hite 3D series is equipped with TesaStar probes and PC-DMIS software. The CMM line has been developed for the entry level price point, says the company.

The DCC model is more accurate and features quicker  acceleration than the model it replaced. Each model has granite worktables, glass scales, air bearings and the manufacturer’s customized “Tricision” bridge design. A measuring envelope of 18" × 20” × 16.5” is included and is large enough to inspect a range of manufactured parts.      

 

RELATED CONTENT

  • Working With Your Working Gage Blocks

    The uses of working gage blocks are as varied as the number of gage blocks in a large set. The working blocks have an intermediate grade and are often used in the inspection or calibration lab, but they may also be found on the shop floor.

  • Composites Machining for the F-35

    Lockheed Martin’s precision machining of composite skin sections for the F-35 provides part of the reason why this plane saves money for U.S. taxpayers. That machining makes the plane compelling in ways that have led other countries to take up some of the cost. Here is a look at a high-value, highly engineered machining process for the Joint Strike Fighter aircraft.

  • Surface Texture From Ra to Rz

    The irregularity of a machined surface is the result of the machining process, including the choice of tool; feed and speed of the tool; machine geometry; and environmental conditions. This irregularity consists of high and low spots machined into a surface by the tool bit or a grinding wheel.

Resources