• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
9/14/2015

Bar Feeder Designed for Fast and Easy Change-Overs

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

LNS America’s GT 326-E automatic magazine bar feeder for sliding headstock machines loads 12-ft.-long barstock in diameters ranging from 3 to 20 mm (26 mm with bar prep).

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

LNS America’s GT 326-E automatic magazine bar feeder for sliding headstock machines loads 12-ft.-long barstock in diameters ranging from 3 to 20 mm (26 mm with bar prep). A two-position, automatic, hydrostatic front stabilizer with V-shaped guiding elements dampens residual vibration between the front of the bar feeder and the back of the spindle. High-speed headstock synchronization system directly connected to the servodrive eliminates transmission delay for perfect synchronization between the pusher and headstock, the company says. The machine includes a high-capacity, 10.6" deep magazine tray for unattended, lights-out production. The bar feeder enables one-minute setup with automatic adjustment of pushing torque, forward speed and feeding length by entering shape, diameter and feed-out length into the user-friendly HMI.

RELATED CONTENT

  • Small Engine Precision Fuels Fifth-Axis Production Concept

    The challenge holding tight tolerances for its billet RC helicopter engine components drove this company to develop an innovative fifth-axis tombstone device to complete multiple parts on an HMC in one setup.

  • Is Magnetic Workholding For You?

    Holding metal parts with magnets is migrating from surface grinding to broader application in general metalworking processes, especially milling. Advances in magnetic technology are causing many shops to re-evaluate how they hang on to workpieces. Here’s a look at how magnets may be a viable workholding solution for your shop.

  • Rethinking Indexers And Rotary Tables

    Affordable indexers and fourth-axis rotary tables greatly enhance the capability of vertical machining centers. It’s almost as good as having a horizontal machining center.

Related Topics

Resources