• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
5/3/2016

Burnishing Tool Achieves Good Surface Finishes

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The UBT-T4 universal single-roll burnishing tool from Cogsdill Tool provides a compact design for use where limited space is available.

Related Suppliers

The UBT-T4 universal single-roll burnishing tool from Cogsdill Tool provides a compact design for use where limited space is available. This turning-holder-style tool is designed for, but not limited to, use on multi-spindle automatic and screw-type machines. Good surface finishes are attainable using the UBT-T4 tool, with features including adjustment for optimum burnishing pressure. It is available in both left-hand (LH) and right-hand (RH) models for burnishing outside diameters, and offers a low-cost replaceable burnishing roll. 

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Modern Machine Shop in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Start With The Right Speeds And Feeds

    Running rotary milling cutters at the proper speeds and feeds is critical to obtaining long tool life and superior results, and a good place to start is with the manufacturer's recommendations. These formulas and tips provide useful guidelines.

  • Tips for Tapping Titanium Alloys

    Creating threaded holes in titanium alloys calls for proper techniques based on an understanding of both the properties of these materials and the peculiarities of the tapping process.

  • Taking The Fear Out Of Hard Turning

    To make the transition to hard turning, you'll need to switch from carbide to CBN inserts, but that is easier (and more economical) than you might think. It's making the jump to much higher surface speeds that might scare you off. It needn't. Here's why.

Resources