• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
10/30/2017 | 1 MINUTE READ

CM602 Saw Machine Cuts Short and Medium Length Material

Originally titled 'Saw Machine Cuts Short and Medium Length Material'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

BLM Group USA’s CM602 automatic CNC sawing machine can handle tube and bar up to 4” in diameter depending on the material, and can achieve blade speeds up to 5,000 rpm. 

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

BLM Group USA’s CM602 automatic CNC sawing machine can handle tube and bar up to 4” in diameter depending on the material, and can achieve blade speeds up to 5,000 rpm. According to the company, it is ideal for cutting short and medium length steel, copper, brass and aluminum tubes, as well as solid bars and custom profiles.  

With the sawing machine the operator is assisted with instructions via icons on a touchscreen panel. By entering the tube shape, material thickness, the cut length and the material type, the machine selects the appropriate blade from its library, calculates the stroke, the cutting head feed rate, the blade speed, and then monitors the chip load to prevent the blade from being over-loaded and developing damaging excessive heat, the company says.

The material is loaded into the cutting area by a servomotor carriage, providing repeatable positioning and accuracy of the cut lengths, the company says.  At the end of the cut, during the return movement of the head, the bar is retracted to enable its detachment from the blade which preserves the material’s end finish and increases the saw blade’s lifetime. 

The cutting head is positioned at 45 degrees to the tube surface. According to the company, its linear movement across the tube provides a uniform load on the blade resulting in reduced noise and less scrap. 

RELATED CONTENT

  • Tips for Tapping Titanium Alloys

    Creating threaded holes in titanium alloys calls for proper techniques based on an understanding of both the properties of these materials and the peculiarities of the tapping process.

  • Where Dry Milling Makes Sense

    Liquid coolant offers advantages unrelated to temperature. Forced air is the fluid of choice in this shop...but even so, conventional coolant can't be eliminated entirely.

  • Start With The Right Speeds And Feeds

    Running rotary milling cutters at the proper speeds and feeds is critical to obtaining long tool life and superior results, and a good place to start is with the manufacturer's recommendations. These formulas and tips provide useful guidelines.

Related Topics

Resources