Coolant Filtration Mounts to Side of Machine
Eastec 2017: Keller Products, a division of Plastic Design Inc., has developed a line of dedicated filtration systems driven by air diaphragm pumps.
Keller Products, a division of Plastic Design Inc., has developed a line of dedicated filtration systems driven by air diaphragm pumps. The coolant is drawn from the machine sump, filtered, and returned to the sump on a continuous basis. Flow rates for the smaller systems are as high as 10 gallons per min. The bag design and aluminum filter housing enable mounting directly to the side of the machine tool. The unit can achieve filtration levels as low as 1 micron. If the customer is working with steel, magnetic rod assemblies can be used in conjunction with the bag filter for enhanced chip removal capabilities. A variety of configurations are available.
Related Content
-
High-Speed Videos Analyze Machining Processes in Fine Detail
Blaser Swisslube captures the machining process, chip formation and behavior of its Synergy 735 metalworking fluid through high-speed, macro photos and videos.
-
AFT's Semi-Synthetic Coolant Extends Sump Life
Advanced Cool 2200 provides high visibility while machining, keeping the machine and parts clean with no odor issues.
-
Ultra-fine Filtration of Cooling Lubricants
Vomat filters act as an important, value-adding factor in metalworking.
