6/8/2015

Line of Aluminum Inserts for Shell, End Milling

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Millstar offers an aluminum cutting insert line featuring modular screw-on heads forshell and end mill cutters with side clearance options.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Millstar offers an aluminum cutting insert line featuring modular screw-on heads forshell and end mill cutters with side clearance options. A variety of holding options, insert sizes, a 90-degree option and back draft capability are available. According to the company, the inserts are also effective in material removal during roughing operations, leaving a good finish in the process. Multiple operations and unrestricted cutting conditions in a single setup provide versatility, efficiency and ultimately more throughput at a lower cost per part for the end user, the company says.

RELATED CONTENT

  • Taking The Fear Out Of Hard Turning

    To make the transition to hard turning, you'll need to switch from carbide to CBN inserts, but that is easier (and more economical) than you might think. It's making the jump to much higher surface speeds that might scare you off. It needn't. Here's why.

  • A Practical Guide To Presetters

    Tool measurement devices help shops save time, control runout and improve tool management.

  • The Challenges of Machining Glass-Filled Plastics

    Plastics reinforced with glass present more machining variables to manage than conventional metals. This shop has developed a process to overcome those challenges and has become more adroit at short-run work along the way.

Related Topics

Resources