10/7/2013

Manual Rollover Positioners for Welding

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Bluco’s line of manual rollover positioners can be used as stand-alone fixturing solutions or alongside existing Bluco fixturing systems.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Bluco’s line of manual rollover positioners can be used as stand-alone fixturing solutions or alongside existing Bluco fixturing systems. The positioners provide 360 degrees of rotation, enabling full access to all sides of the workpiece, and the rotation is clocked in 22.5-degree increments so that the workpiece can be located at the optimal weld position of each joint. Positioners can also be provided with custom increments. Several styles and lengths of positioners are available.

RELATED CONTENT

  • Is Magnetic Workholding For You?

    Holding metal parts with magnets is migrating from surface grinding to broader application in general metalworking processes, especially milling. Advances in magnetic technology are causing many shops to re-evaluate how they hang on to workpieces. Here’s a look at how magnets may be a viable workholding solution for your shop.

  • Pins: The Alternative To Parallels

    These vise jaws use protruding, mechanical pins to repeatedly support workpieces either horizontally or at angles. They are said to allow quicker setups than conventional parallels.

  • Rethinking Indexers And Rotary Tables

    Affordable indexers and fourth-axis rotary tables greatly enhance the capability of vertical machining centers. It’s almost as good as having a horizontal machining center.


Related Topics