• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
11/19/2003

Monolayer Coating

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

The new AlTiN coating is said to feature a combination of high-heat resistance, high-hardness and high-friction coefficient, making it special in its ability to enhance cutting tool performance in applications where the hardness of the material is 40 HRC or higher. AlTiN (Aluminum Titanium Nitride) is designed for high speed, high velocity machining and dry high speed machining of hard and/or abrasive materials. The high aluminum content and mechanical properties of the coating are said to provide higher hardness and better abrasion resistance for milling, drilling and turning of hard materials, along with freer cutting properties and improved chip evacuation for dry machining applications.

RELATED CONTENT

  • Threading On A Lathe

    The right choices in tooling and technique can optimize the thread turning process.

  • Start With The Right Speeds And Feeds

    Running rotary milling cutters at the proper speeds and feeds is critical to obtaining long tool life and superior results, and a good place to start is with the manufacturer's recommendations. These formulas and tips provide useful guidelines.

  • Machining Dry Is Worth A Try

    Reducing cutting fluid use offers the chance for considerable cost savings. Tool life may even improve.

Related Topics

Resources