4/9/2018

MT Drill Multitasks in a Single Operation

Originally titled 'Drill Multitasks in a Single Operation'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Carmex’s MT Drill is designed to drill, chamfer, and thread mill a hole in a single operation, reducing cycle times by combining operations and eliminating tool changes.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Connect at

Carmex Precision Tools will be exhibiting new technology at IMTS 2020 in Chicago this September.

Plan to meet up with their team or get registered here!

Carmex’s MT Drill is designed to drill, chamfer, and thread mill a hole in a single operation. Constructed of solid carbide, the two-fluted drill/thread milling cutter, with 45-degree chamfering, reduces cycle times by combining operations and eliminating tool changes.

The drill can be used for mass production operations, features both right- and left-hand internal threads, and the same tool can be used for blind or through-hole drilling. The carbide grade can be used for aluminum and cast-iron and produces a high-quality thread surface. Featuring internal coolant, the tool is constructed for long life over multiple applications and is available in a variety of configurations and sizes. 

RELATED CONTENT

  • Inserts For Difficult Materials

    Economic efficiency is an important consideration when choosing tools for challenging metals.

  • Taking The Fear Out Of Hard Turning

    To make the transition to hard turning, you'll need to switch from carbide to CBN inserts, but that is easier (and more economical) than you might think. It's making the jump to much higher surface speeds that might scare you off. It needn't. Here's why.

  • Tips for Tapping Titanium Alloys

    Creating threaded holes in titanium alloys calls for proper techniques based on an understanding of both the properties of these materials and the peculiarities of the tapping process.

Related Topics

Resources