• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
6/19/2013

Pallet Automation System for Large Loads

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Fastems’ FPC-7500 flexible pallet container automation system is designed to handle 1,000-mm and 1,250-mm pallets where large load capacity is required.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Fastems’ FPC-7500 flexible pallet container automation system is designed to handle 1,000-mm and 1,250-mm pallets where large load capacity is required. The system accommodates loads ranging to 7,500 kg with heights ranging to 2,300 mm and diameters as large as 2,300 mm. The dual-rail-guided pallet change vehicle features a low-profile design. The system is equipped with a load station and four pallet positions, and can be expanded to configurations of six, eight, 10 or 12 pallet positions.
 
The system features Fastems’ manufacturing management system (MMS) cell controller. The company’s MMS5 software can be used in a single manufacturing cell or as a shop-wide system, and can be integrated with existing plant software such as ERP and MRP systems. It is also fully compatible with MTConnect.

RELATED CONTENT

  • The Right Fit Is In The Fixtures

    Custom engineered workholding fixtures are key to the effectiveness of an unusual Automated Production System (APS) recently installed at Kurt Manufacturing. It helps that one of this company’s specialties is custom engineered workholding fixtures.

  • Programming A Robot The Way You Program A CNC Machine Tool

    Programming a robot with the same CAM software used for a multi-axis machine tool makes it unnecessary to “teach” the robot by jogging it manually from point to point and recording these point-to-point moves as the robot’s motion commands. Robotmaster is a software package that provides this CAD/CAM-based, off-line programming for robots. It runs fully integrated inside Mastercam CAM software for CNC machine tools.

  • Machining with Robots

    Several exhibitors at the recent EMO show in Hannover, Germany, featured demonstrations of robotic arms wielding live cutting tools such as end mills or face mills. Perhaps the most dramatic demo was presented by Delcam to showcase this CAM developer’s PowerMill Robot Interface.

Resources