3/29/2010

Stainless Steel Collets

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Beaumont Machine offers an ER16 spring collet made from 300 series stainless steel.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Beaumont Machine offers an ER16 spring collet made from 300 series stainless steel. The company designs and manufactures its fast hole EDM in the United States and is now doing the same with its collets.
 
The collets are manufactured for the company’s FH series EDM but can be used anywhere dielectric water is present, or where rust and longevity are a concern. The collets are available from 0 to 10 mm in 0.5-mm increments.

RELATED CONTENT

  • Tips for Controlling Oxidation and Pitting on a Wire EDM

    Additives, machine settings, workpiece materials and current technology are factors in avoiding common problems with unwanted rust and surface defects.

  • Too Small To Touch

    Hummingbird takes on machining work that is too small for most shops to handle. In fact, Hummingbird tries not to handle it either. To accurately machine the tiniest parts, this shop relies on processes that are as hands-off as possible.

  • EDMing Beryllium Copper: An Introduction

    Beryllium copper offers many benefts to the moldmaker and plastic injection molder, yet questions remain on how to best EDM it, which alloy to specify, where to use it, and is it safe to work with?

Resources