5/21/2004

Tapping Arm For Small Holes

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

The A-32 FlexArm is designed for tapping small sizes. Bearings in the unit’s construction allow the operator to line up easily over the hole. With a working range of 11" x 34", the tapping arm stays perpendicular anywhere it is moved on the table. According to the company, the tapping arm was also built with strength and durability in mind. With a 400-rpm pneumatic motor on the unit, it has the capacity to use taps as large as 9/16" (M14) in steel. 

Resources