• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
5/28/2015

Manual Collet Fixture Enables Vertical, Horizontal Mounting

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Royal Products’ Quick-Grip (QG) manual collet fixtures are suitable for use with the company’s QG-42, 65 and 80 series collets.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Royal Products’ Quick-Grip (QG) manual collet fixtures are suitable for use with the company’s QG-42, 65 and 80 series collets. The fourth- and fifth-axis fixtures can be used in both stationary and rotary table applications, and the bottom and all four sides are ground for both vertical and horizontal mounting. The unit features parallel-grip collets with a 0.062" clamping range and is actuated vie a hybrid mechanical/hydraulic mechanism. The pullback design with an internally threaded back plate enables the use of a stop rod for more precise workpiece positioning. According to the company, 10-sec. collet changes are possible with the fixtures.

RELATED CONTENT

  • Don’t Forget The Drawbar

    The force that holds the toolholder in the machining center's spindle can weaken over time. If you haven't checked drawbar force in a while, this may be the weak link in your process.

  • Why Use Hydraulic Toolholders

    The book on hydraulic toolholders is that they are fussy to set, fragile to operate and expensive to buy. So why do many shops choose them over other holders that seem less demanding? This Chicago mold builder has good reasons for its choice.

  • How Do You Get The Cutting Parameters Right For Small End Mills?

    A reader recently asked about speed, feed rate and depth of cut when using small tools in steel.

Related Topics

Resources