Cobra Carbide

12650 Magnolia Ave.
Riverside, CA 92503 US

Division
American Quality Tools, Inc.

Connect


Renovated Office

Cobra Carbide Invests $10 Million for Expansion

If you haven’t heard of Cobra Carbide, you will surely know the name very soon. This is the belief that is spearheading the calculated expansion of the Southern California based Carbide Cutting Tools company. Under the direction of President, Rakesh Aghi, and Vice-President, Patrick Davis, the company has undergone a thorough process of updating their machines and resetting the company culture.

 

Cobra Carbide’s priorities have always revolved around the customers, and this expansion will further attest to the company’s beliefs. As the company sold off operations in India, the company completely manufactures everything in-house; all their tools are Made in the USA. Cobra Carbide has not only purchased 8 brand new machines, but the company has also expanded its warehouse by purchasing its adjacent building to increase its capacity from 9,000 sq ft. to 20,000 sq ft. The exterior and interior of the building has also been renovated.

 

The overarching mantra of the company, “Business is earned, not given,” is instilled in all current and incoming employees. The company’s expansion is not just limited to tangible capital, but it is also for the internal restructuring of the company. “Punctuality, discipline, diligence, and integrity is expected from every single employee. This may sound difficult for employees to practice on a daily basis, but Cobra Carbide also makes sure its employees are well-treated and maintain happiness” says Patrick Davis (Cobra Carbide Vice-President).

 

It seems clear that Cobra Carbide is poised to make a mark beyond their respective industry. Remember where you heard it first; Cobra Carbide will be a known name in the near future.

 

A Message from Cobra Carbide

About Our Company...

Cobra Carbide is located in Riverside, California.

BLACK MAMBA: High-Performance Coolant-Fed Drills

Brief Overview: 140° point angle and high performance geometry allows for high penetration rates.

ADDER: Ultra-Performance Universal Endmills

Second to NONE: Simply the best available on the market.

Customer Testimonials: Speeds & Feeds

Here at Cobra Carbide, we feel that it’s important to contact our customers to ensure that our products are living up to not only the standards that we set, but to their standards as well.

As Seen In Modern Machine Shop

Coolant-Fed Drills Prevent Damage
Cobra Carbide offers its Blackmamba series of coolant-fed drills designed to eject chips and remove them from the cutting zone while drilling deep holes, preventing damage to the tool and workpiece.

 Cobra Carbide Krait end mill

Cobra Carbide High-Feed End Mills Boost Productivity
Cobra Carbide’s Krait end mills are designed to slot, rough and finish steel, stainless steel and high-temperature alloys at high feed rates, resulting in reduced production time and improved productivity.

Variable-Helix End Mill Cuts Chatter
Cobra Carbide’s Viper variable helix end mill is designed to help reduce the chatter caused by variations in chip thickness that limits material removal rates.

Coolant-Fed Drills Enable Deep Drillling
Cobra Carbide’s Blackmamba series of coolant-fed drills are designed to enable drilling to a depth of eight times the tool diameter.

Product Categories of Cobra Carbide

Drills
End Mills
Inserts, Indexable (Carbide, etc.) & Tool Inserts
Reamers

Trade Names

Adder - Universal Endmill
Black Mamba-CoolantFed Drill
Krait – High Feed Endmills
Viper – Variable Helix Endmills