12650 Magnolia Ave.
Riverside , CA 92503 US
American Quality Tools, Inc.
ADDER: Ultra-Performance Universal Endmills
Second to NONE: Simply the best available on the market.
Adders are used for slotting, shoulder milling & high feed milling. The geometric design is suitable for roughing and finishing through a wide range of materials. Not only this, but the flute geometry has been specially designed to increase stability, reduce chatter, and smooth the cutting action. This is a tool that you can take from start to finish; it can handle anything you throw at it.
We currently offer this line in a 4 Flute design, a 5 Flute design is being developed.
This tool has been tested and proven to outperform many of the top competitors in the industry today. Not only that, but we have found the tool life to far exceed customer expectation; in both conventional and high-speed milling applications.
In this industry, no news is good news, but the tremendous response of positive feedback for our Adder is astonishing. This is one tool you have to see in action to believe.
What do we do differently?
Not many companies can say they are an innovator in their field. We develop our own geometric designs, apply next generation coatings with our sister-company, Advanced Coating Technologies, and manufacture everything here in sunny Southern California.
Why Choose Cobra Carbide?
Our improvements to the geometric design drastically increase the effectiveness of Axial and Radial cutting, while speeding up your overall surface footage. Cobra Carbide creates tools that have the highest penetration rates, decrease cycle times, and will increase your product quality.
Solid Carbide vs. Other Metals
There are typically three types of metals that are used for creating cutting tools. They are: High-Speed Steel, Cobalt, Carbide-tipped / Solid Carbide. Each of these will always have a place in our industry.
Cobra Carbide has teamed up with the top suppliers in our industry to provide the solid carbide best blanks available, allowing our products to flourish as the best in the cutting tool industry.
Due to our advanced geometries, we assure that our tools will replace your current favorite and outlast them in tool life.
Cobra Carbide should be your first choice for the best Carbide Endmills, Drills, Reamers, and Burrs.
A Message from Cobra Carbide
As Seen In Modern Machine Shop
Cobra Carbide High-Feed End Mills Boost Productivity
Cobra Carbide’s Krait end mills are designed to slot, rough and finish steel, stainless steel and high-temperature alloys at high feed rates, resulting in reduced production time and improved productivity.
Variable-Helix End Mill Cuts Chatter
Cobra Carbide’s Viper variable helix end mill is designed to help reduce the chatter caused by variations in chip thickness that limits material removal rates.
Coolant-Fed Drills Enable Deep Drillling
Cobra Carbide’s Blackmamba series of coolant-fed drills are designed to enable drilling to a depth of eight times the tool diameter.