Doosan Machine Tools America
19 A Chapin Road
Pine Brook
,
NJ
07058
US
Connect
- Visit Company Website
-
Search Machine Specs(+)
Powered by: Techspex - 973-618-2500
The New Puma GT2100 Series
The all-new compact Puma GT2100 series are Doosan’s 8” and 10” turning centers, incorporating the key advantages of the popular Puma 240 in a more compact and cost competitive package, with improved performance, accuracy and reliability. Swing over bed, 23.6”. Swing over saddle, 15.4”. Maximum turning diameter, 15.4”, while the maximum bar working diameter is 3.2” (Puma GT2100(M)B). Maximum turning length is 22.1”.
A Message from Doosan Machine Tools America
As Seen In Modern Machine Shop
OMIC R&D Partners with SMW AUTOBLOK For Robotics Project
OMIC R&D and SMW-AUTOBLOK are partnering to research and develop an automated connection interface for robotic end effectors.
Doosan's Multi-Level RPS for its NHP Series Cuts Setup Time
Doosan Machine Tools has introduced a multi-level RPS for the NHP Series of horizontal machining centers, which cuts setup time and adds capacity.
Doosan Puma SMX5100L Turn-Mill Has More Chuck Sizes
The Doosan Puma SMX5100L is a twin-spindle, multi-tasking turn-mill center designed to complete complex parts in a single setup, with chuck sizes available in 15, 18 and 21 inches.
Doosan's Puma SMX5100L Turn-Mill Offers Greater Working Area
IMTS Spark: Doosan Machine Tools’ Puma SMX5100L twin-spindle, multitasking turn-mill, is the largest machine in the Puma SMX series.
5 Impressions of EMO 2019, from Automated to Autonomous Manufacturing
The robot show? Not quite that. But automation and the expectation of processes that can run unattended if needed are clearly core to manufacturing now.
Is Robotic Automation the Key to Drawing (and Keeping) New Employees?
Robotic automation is transforming a job that was perhaps a machine operator’s least-favorite work assignment into one that is not a heavy lift.
A Shop Where a Machine Loads Itself
Instead of investing in an external robotic loading system, this shop adopted technology that lets a machine tool load parts on its own.
Doosan, CAMplete Solutions Enter Cooperative Agreement
Equipping Doosan’s CNC machines with CAMplete’s verification, postprocessing and simulation software will save users time and money, according to the companies.
Doosan Maps Good Eats
A booth handout helps attendees navigate the Windy City’s culinary delights.
High-Speed VMC Reduces Non-Cutting Time
IMTS 2018: Doosan Machine Tools’ DNM 5700S VMC is designed to cut at high speed and to reduce non-cutting time.
5 Axis VMCs Run Lights-Out
IMTS 2018: Doosan Machine Tools’ DVF series of compact 5 axis machining centers is designed to cut diverse and complex shapes.
Turning Centers Feature Y Axis, Larger Part Capacity
IMTS 2018: Doosan Machine Tools will display its Lynx 2100LY series of compact turning centers with a Y-axis.
May 2018 Product Spotlight: Machining Centers
This month’s Modern Equipment Review Spotlight focuses on a variety of vertical, horizontal and five-axis machining centers, some with dual spindles.
Asian Trade Shows Reveal Focus, Unbridled Optimism
While South Korean builders continue to push more advanced technology, newcomers from China seem eager to sell in North America.
Compact VMC Designed for Lean Manufacturing Cells
Doosan Machine Tools has added the DNM 4000 to its line of vertical machining centers (VMCs).
Turning Center Adds 12-Station Lower Turret
Doosan Machine Tools has announced its Puma SMX multitasking turning centers are available with a lower turret for enhanced versatility and productivity.
Why a Two-Spindle VMC? Double the Machining Without Double the Footprint
The two-spindle VMC increases output where space and other factors are constrained. With W-axis compensation for Z-height differences, setups don’t have to be perfect to use two spindles in tandem.
Two-Spindle Vertical Machining Center Doubles Capacity
Doosan Machine Tools announces the addition of the DMP 500/2SP to its line of vertical machining centers.
Lathe Increases Rigidity for Tough-to-Machine Materials
Doosan Machine Tools’ Puma 2600 SY II is a 10" class, subspindle Y axis horizontal turning center designed to craft high precision parts from a range of tough-to-machine materials.
HMC Designed for Rapid Metal Removal for Aerospace, Automotive
Doosan Machine Tools introduces the NHP horizontal machining center series, built for rapid metal removal rates.
Doosan Partners with 5ME to Offer Cryogenic Machining Options
Doosan will sponsor an open house event at 5ME’s Michigan tech center later in 2017 to demonstrate cryogenic machining on its machine tools.