Genevieve Swiss Industries, Inc.

6 Old Stage Road

Westfield, MA 01085 US


TI-LOC End Mill Extensions for Micro End Mills

GenSwiss offers the new Ti-Loc SwissClamp slitting and milling toolholders for increased rigidity, high quality and long tool life. It enables quick-change of tooling into fixed locations. Designed to direct mount to any ER 8, 11, 16, 20, or 25-collet holder using standard ER nuts, the taper integrated Ti-Loc(tm) toolholders extends micro end mills closer to the workpiece and eliminates inaccuracies caused by “tolerance stacking”. Typical TIR is held to 0.0004” or better. All mating surfaces are precision ground.

The Ti-Loc taper integrated design eliminates a collet and allows the operator to preset tool length out of the machine. For both sawing and milling, repeatable positioning is a given as well as increased rigidity.

Arbors are available for 3mm, 5 mm, 6mm, 8 mm, and .125in, .187in, .250in, and .312in ID saws with more sizes in development. Micro end mill extensions are available to hold 1-8mm, and .062 - .312in shanks with more sizes developing. Toolholder Installation simply requires a twist and snap into any ER clamping nut. No special holding nut is required. The quick change is accomplished by loosening the clamping nut, allowing the toolholder to break from the locking taper of the spindle or sleeve.  Coolant-thru versions are available in ER16 sizes! 

A Message from Genevieve Swiss Industries, Inc.

Company Profile

Genevieve Swiss Industries, Inc. provides specialized tools and accessories for CNC Swiss-type machines & lathes.

New MULTIDEC 3000 Coolant Thru Tool Holders for High Performance

New MULTIDEC 3000 coolant through tool holders incorporate an internal coolant jet stream aimed at the 3000 series insert edge.

As Seen In Modern Machine Shop

GenSwiss rotary broach tools.

Hexagonal Rotary Broach Tools Engineered for Medical Parts
Eastec 2019: Swiss-type tooling provider GenSwiss is releasing a line of hexagonal rotary broach tools, each of which features a dished cutting face and vent holes for relieving hydraulic pressure. 

GenSwiss Modular Back Toolholders Suit Swiss-Type Machines
Multidec Back Tool toolholders from GenSwiss enable turning operations to be performed on the subspindle and from an ID tool position on Swiss-type machines.

Swiss Tools for Micro Grooving, Turning
Designed for micro turning and grooving applications in Swiss-type machines, the Multidec 1600 series tools use inserts ranging from 0.0019" to 0.108" thick with cutting edge repeatability of 0.004".

Multidec 1600 Series

Micro Grooving on Swiss Machines
In any turning application, grooving can be a critical, even challenging, operation.

 micro reamer holder

The Importance of Float During Micro Reaming
Micro reamers require a floating holder to compensate for any machine positioning inaccuracies.

Product Categories of Genevieve Swiss Industries, Inc.

Arbors (for Cutters)
Boring Tools for Turning Machines
Broaching Attachments
Broaching Tools
Buffing & Polishing Machines
Centrifugal Barrel & Disc Finishing Machines
Chamfering Tools
Chucks, Collet Type (for Workholding)
CNC Attachments
Coolant Delivery Systems
Coolants, Cutting Fluids & Oils
Cut-Off Tools/Attachments
Deburring Machines
Deburring Tools (Machine Tool Spindle-Mounted)
Drill Bushings
Drill Chucks
Drilling Heads/Attachments
End Mills
Gear Cutting Tools
Grooving Tools
Inserts, Indexable (Carbide, etc.) & Tool Inserts
Key Seating Tools
Knurling Tools
Milling Cutters
Milling Heads/Attachments
Polygon Turning Attachments
Reaming Attachments
Saw Blades
Slotting Attachments
Slotting Saws
Spline Inserts
Tap Drivers & Attachments
Tapping Attachments
Thread Milling Cutters
Thread Whirling Attachments
Thread Whirling Tools
Threading Tools
Threading Tools - Cutting
Tool Bushings & Adaptors Attachments
Tool Turrets
Tooling Systems, Modular and/or Quick-Change
Vibratory Tumbling Machines

Trade Names

Multidec CUT
Multidec ISO
Multidec Thread Whirl
Multidec TOP
PCM Willen