Kurt Manufacturing - Industrial Products

9445 East River Road NW

Minneapolis, MN 55433 US

Division
Kurt Manufacturing Co.

Connect

A Message from Kurt Manufacturing - Industrial Products

Kurt Is Your One Stop Advanced Technology Solutions Provider.

Kurt provides a full line of innovative products including: Vises, 5 Axis Schenke Clamping System, Workholding Systems, ToolBlox, Custom Workholding Systems, Fixtures, Zero-Point Workholding, Custom Gaging Systems, Precision Measuring Systems, Accessories.

As Seen In Modern Machine Shop

A part on a Nikken rotary table in a VMC

Shop Works to get the Most Out of Its Five-Axis Capabilities
Vertical machining centers with rotary tables helped this Indiana job shop set itself apart, but specific machine features and additional equipment have helped it use them more efficiently to grow its business.

Kurt Motorized Air Vises

Motorized Air Vises Designed for Automated Machining Cells
Kurt’s line of motorized air vises utilizes air-powered motors to provide consistent preset clamping force and programmable vise opening.

Kurt DX4 CrossOver Vise

Reduced-Size Vise Provides Strong Clamping
Kurt has released the DX4 CrossOver Vise, a reduced size version of its DX6 CrossOver Vise.

Kurt Workholding KHU6 hydraulic unit

Hydraulic Workholding Enables Choice of Preferred Clamping Method
Kurt Workholding’s KHU6 hydraulic unit has both single- and double-acting capabilities, enabling the user to choose a preferred clamping method.

Kurt’s SeraLock Towers

Modular Towers Enable Mixing, Matching of Clamping Components
Kurt’s SeraLock Towers, along with its WedgeLock and MoveLock workholding modules, provide density, accuracy and flexibility to accommodate different part sizes and multiple parts.

NCSimul 3D graphics

The Value of Double-Checking Your Programs
Using simulation software to validate CNC programs for large, expensive precision parts helped one manufacturer reach a delicate balance of speed and accuracy.

a man using NCSimul software

Simulation Software Helps Shop See, Prevent Costly Errors
Kurt Manufacturing needed to validate CNC programs for large, expensive precision parts. NCSimul Machine simulation software from Spring Technologies saved setup time, reduced machining errors and produced accurate parts quickly. 

Small, low-profile screw-down clamps

Small, Screw-Down Clamp for Various Tables, Fixtures
The Kurt MiniLock is a small, low-profile screw-down clamp designed as a cost-effective, easy-to-use option for rigidly clamping components on machine tables, fixture plates, tombstones and trunnion fixtures.

Kurt DX6 CrossOver

Vises Designed for Precision CNC Production to Toolroom Applications
Westec 2017: Kurt will show its lineup of vises for five-axis, high-precision production machining, including its DX6 CrossOver vise.

Kurt Workholding CarvLock

Hydraulic Workholding Towers Offer as Many as 12 Clamping Stations
Kurt Workholding offers a complete line of high-density CarvLock workholding towers for precision machining with eight or 12 clamping stations in both manual and hydraulic models.

Kurt MaxLock HP

Self-Centering Vises Resist Jaw Deflection, Part Lift
Kurt’s MaxLock HP series of self-centering vises are designed for maximum five-axis workholding rigidity.

Kurt DoveLock

Dovetail Vises Provide Five-Sided Access to Workpiece
Kurt’s new DoveLock dovetail vises are designed for high clamping strength and five-sided access to the workpiece in five-axis, four-axis and palletized CNC machining systems.

Kurt Cluster Tower vise with DoveLock jaws

New Workholding Setup Enable Lights-Out Production
For Idex Health and Science, manufacturing glass components was time-consuming on a VMC. Switching to an HMC with a Cluster Tower vise with DoveLock jaws from Kurt Manufacturing enabled more stable, lights-out machining.

Kurt DX6 CrossOver

Vise Achieves Flatness, Parallelism Requirements
Kurt’s DX6 CrossOver vise is designed to achieve high workholding strength and performance where flatness and parallelism are critical.

Kurt SideWinder

Vise Reduces Setup Time for Secondary Operations
The Kurt SideWinder vise provides vertical workholding without interfering with an existing host vise or the spindle.

Kurt Manufacturing DoveLock

Jaw Platform Enables Fast, Accurate Vise Jaw Change
Kurt Manufacturing’s DoveLock jaw setup enables one-minute vise jaw changes with repeatable accuracy of ±0.001".

Kurt VersatileLock vise

Vises Provide Consistent Ganging for Part-to-Part Tool Movement
Kurt’s VersatileLock vises ensure 0.0005" repeating accuracy in 20 models including hydraulic, manual and pneumatic actuation.

Kurt AngLock vise

Self-Centering Vises Ensure Workpiece Stability
Kurt’s AngLock vise line comprises more than 60 models in 2.5", 4", 6", 8" and 10" jaw widths with many available in manual and hydraulic actuation.

Kurt Workholding DT20 Dovetail vise

Line of Workholding Products Expanded
Kurt will feature its DT20 Dovetail vise designed for aggressive five-axis machining.

Kurt Manufacturing DoveLock system

New Jaws Speed Change-Over for Short-Run Jobs
This shop found that a quick-change jaw system reduced 80-minute change-over times to just 8 minutes.

Product Categories of Kurt Manufacturing - Industrial Products

Angle & Sub Plates
Automated System & Cells for Assembly & Test
Automated System & Cells for Material Removal
Chucks, Special
Clamps & Fixturing Devices
Data Collection Devices for Gaging, SPC, etc.
Fixturing Systems
Gages - Digital
Gages - Mechanical
Pedestal Type Fixtures & Tombstone Blocks
Probes, Electromechanical
Robots, Industrial
Statistical Data Collection & Analysis Software
Vises & Vise Jaws
Vision Systems
Workholding, Custom

Trade Names

AngLock
ANGLOCK VISES
CarvLock
ClusterTower
DockLock
DoubleLock
DoveLock
Groove Lock
Hd & HDL Anglock Vises
InnerLock
KurtSmart
MAXLOCK
MiniLock
MoveLock
PINLOCK
SeraLock
SideWinder
ToolBlox
Versatile Lock