Raptor Workholding Products

901 N Lake St.
Burbank, CA 91502 US

Connect


On your mark, get set, ready .... GO!!! We have a quick solution - Switch it up in under a minute!

Eliminate workholding break-down and set-up for larger applications.

RWP-006(SS) + RWP-224-V100 + RWP-502 = DONE!!!

GO LEAN!

When you have an application the requires a self centering vise, and do not have time to breakdown your set up, check this out:

  1. Simply insert the RWP-244-V100, 2.25" dovetail connector, on to the RWP-006(SS),
  2. then mount 100mm Self Centering Vise: RWP-502 on to the RWP-244-V100.

 

 

 

A Message from Raptor Workholding Products

WE ARE RAPTOR!

American Made - Sold Worldwide!

Workholding Trifecta is here!

Raptor has expanded its product line becoming the Workholding Trifecta for LEAN Manufacturing!

As Seen In Modern Machine Shop

Hitting the Zone with Five-Axis Machining
By investing in five-axis machining technology, Advance CNC Machining has done more than just add new capabilities to its roster. It has found a way to achieve something that most of us strive for: a way to work “in the zone.”

fifth-axis tombstone technology

Shop Favors Different Flavor of Five-Axis Technology
Campbell Engineering benefits from a new twist on the tombstone workholding concept, which enables one of its HMCs to perform 3+2 machining to reduce scrap while supporting the higher-volume needs of its medical customers.

Mitee-Bite, Te-Co Acquire Raptor Workholding
The three companies will continue to operate individually, though with a shared distribution network.

Raptor Workholding RWP-030SS fixture

Dovetail Fixture Enables Five-Sided Machining
Raptor Workholding’s RWP-030SS dovetail fixture is intended for milling applications on four- and five-axis CNC machines.

Raptor Mini Nest RWP-019-4X45T

Workholding Device Features Pyramid Base
Available from Raptor Workholding Products, the Mini Nest RWP-019-4X45T features a 45-degree pyramid base design to enable access to all machined areas of each workpiece.

Pedestal fixture

Get That Part off the Table
Vertical machining centers with simultaneous five-axis machining capability have become popular in recent years.

Fixture Holds Large Workpieces
Raptor Workholding Products’ RWP-006 dovetail workholding fixture is designed to hold large workpieces weighing as much as 80 lbs. 

RWP-001 dovetail fixture with blank workpiece.

Job Shop-Developed Dovetail Fixture Takes Wing
 Two aerospace job shops in California collaborated to produce a workholding fixture that allows any shop to set up a fully fixtured pallet dedicated to a five-axis job and then store the fixtured pallets for immediate use whenever the job repeats. 

Product Categories of Raptor Workholding Products

Clamps & Fixturing Devices
Fixturing Systems
Pedestal Type Fixtures & Tombstone Blocks
Tooling Systems, Modular and/or Quick-Change
Vises & Vise Jaws
Workholding, Custom

Trade Names

Dovetail Cutters
Dovetail Fixtures
Dovetail Holding Fixtures
Micro Dovetails