3/9/2009

Electrode Loading for Fine-Hole EDM

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The Makino EDFH1 is a fine-hole EDM machine capable of machining holes as small as 10 microns in diameter using a 6-micron-diameter electrode. One user of this machine is Hummingbird Precision Machine in Lacey, Washington. This video taken at Hummingbird shows how the electrode is loaded.

Loading the player ...


Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

The Makino EDFH1 is a fine-hole EDM machine capable of machining holes as small as 10 microns in diameter using a 6-micron-diameter electrode. One user of this machine is Hummingbird Precision Machine in Lacey, Washington. This video taken at Hummingbird shows how the electrode is loaded.

RELATED CONTENT

  • EDMing Beryllium Copper: An Introduction

    Beryllium copper offers many benefts to the moldmaker and plastic injection molder, yet questions remain on how to best EDM it, which alloy to specify, where to use it, and is it safe to work with?

  • Anti-Electrolysis Developments In Wire EDM

    Originally, wire EDM had two things going against it. It was slow, and often it left an undesirable surface finish. In the last few years, wire EDM builders have fixed the speed problem. Now they're well on their way to fixing the surface finish problem.

  • Wire EDM In The Extreme

    Cutting metal with an energized strand of wire is still one of the most dynamic frontiers in metalworking, and this shop goes to extremes to keep up with the latest advances. It has even developed some of its own.