• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
3/15/2011

Video: Programmable Shopfloor Gaging System

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

System provides flexible alternative to hard gaging near the machine tool.

Loading the player ...


Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Renishaw produced this video describing its new Equator system for shopfloor gaging. The system is meant to provide a flexible, programmable alternative to hard gaging near the machine tool. For more detail, see the article under "Editor's Picks" at right.

RELATED CONTENT

  • Surface Finish: A Machinist's Tool. A Design Necessity.

    Simple "roughness" measurements remain useful in the increasingly stringent world of surface finish specifications. Here's a look at why surface measurement is important and how to use sophisticated portable gages to perform inspections on the shop floor.

  • Going Lean in Order to Grow

    This shop has a plan for dramatically expanding its contract machining business in high-value markets.

  • How Accurate Is Your Machining Center?

    Virtually every machine tool builder lists, as part of a machine's specification, accuracy and repeatability figures. What's generally not given is the method used to arrive at the figures. Though these methods are defined in linear positioning standards, not all builders use the same standards.