Additive Manufacturing

H13 Laser Sintering Process for Robust Tooling
Partnership is the key to developing advanced process parameters for producing robust H13 tooling using laser sintering process.

3D Printed Fixtures Speed Setup for Inspection
3D printed fixtures enable this company to quickly set up parts for CMM inspection, whether it's a one-off or recurring job. 

Additive Manufacturing Has Found A Home in Moldmaking
Andrew Garstkiewicz, Senior AME for GE Appliances, a Haier company, reflects on 3D printing’s past and future in moldmaking.

A Machine Shop Poised for Additive Production
By laying the groundwork now, Able Tool will be prepared for the day when machine shops are commonly called to produce metal parts via additive manufacturing.

Lower Buy-to-Fly Ratios with Near-Net Additive Manufacturing
Building up large parts with wire-arc metal 3D printing rather than machining from solid has allowed this aerospace manufacturer to reduce its buy-to-fly ratio dramatically. 

3D Printing: Viewpoints from the MMT Editorial Advisory Board, Part 1
Each month, MMT has published editorial from its advisory board about 3D printing’s current and future prospects in moldmaking. Here are a few of them.

Additive Manufacturing Via Material Extrusion
Material extrusion was the second additive manufacturing process to be successfully commercialized. After three decades of material advancements and a diverse array of start-ups and applications, the use cases for this technology are still going str...

A Systematic Approach to Laser Sintering
As an early adopter of laser sintering technology, NyproMold uses a very focused, two-step strategy for evaluating when it makes sense to use it.

Can You 3D Print with Machining Chips?
Meld Manufacturing’s solid-state metal 3D printing process is compatible with a range of materials and formats, even chips from machining.

The Impact of 3D Printing on Wire EDM
3D printing impacts wire EDM workholding, cutting conditions and machine tool specifications.