CAM for Die/Mold

Exploring the: CAM for Die/Mold Zone

68 Results for: Product

Sort by:
Published: 11/17/2017

CAD/CAM Module Automates Die-Sinking Electrode Design
Open Mind Technologies’ HyperCAD-S Electrode module for its HyperMill software automates the design and production of electrodes for die-sinking, enabling users to base their electrode designs on the face to be machined within the component ge...

Published: 11/14/2017

Wire EDM CAM System Recognizes Machinable Features
DP Technologies’ Esprit CAM software is designed to address specific needs of wire EDM.

Published: 5/22/2017

CAM Software Simplifies Interface for Complex Parts
Amerimold 2017: Autodesk will demonstrate its PowerMill CAM software and its Moldflow mold simulation product.

Published: 5/18/2017

Updated CAM Software Includes Parallel Finishing Tool Path
Amerimold 2017: Vero Software will demonstrate WorkNC 2017 R1, which features a new parallel finishing tool path that the company says has achieved cycle-time reductions of as much as 80 percent.

Published: 5/3/2017

Simulation Software Stands Alone or Integrates with CAM Systems
Amerimold 2017: CGTech will showcase the latest version of its Vericut CNC machine simulation, verification and optimization software.

Published: 5/2/2017

CAM Update Eases Simultaneous Five-Axis Conversions
Amerimold 2017: CGS will introduce Version 13 of its CAM-Tool software for 3D machining of molds and dies.

Published: 6/8/2016

Integrated CAM Software Enables Programming from CAD
Mastercam X9 for SolidWorks is a CAM application that is fully integrated into Dassault Systèmes’ SolidWorks CAD software, enabling the user to program parts directly in SolidWorks using Mastercam’s tool paths and machining strategies.

Published: 5/31/2016

CAD/CAM, Nesting Software Nests Parts Across Multiple Sheets
Jetcam has launched version 19 of its Expert CAD/CAM and nesting software, featuring several features focusing on nesting capabilities.

Published: 5/27/2016

CAM Software Connects Directly to Cloud-Based Tool Databases
Delcam has released the 2016 R2 version of its PartMaker software for programming CNC mills, lathes, wire EDMs, turn-mills and Swiss-type lathes.

Published: 5/26/2016

Software Enables Off-Line Creation of Inspection Fixturing Setups
Renishaw’s FixtureBuilder is a 3D modeling software package designed to enable the off-line creation and documentation of fixturing setups.

SmartCAM features New Mill/Turn Sub-Spindle and B-axis Support, Morph Pattern Roughing.