Cutting Tools

Exploring the: Cutting Tools Zone

595 Results for: Product

Sort by:
Published: 12/5/2019

Tungaloy's ETTL Insert Improves Efficiency for Parallel Thread Milling
Thread milling provides a high level of security thanks to the light cutting load generated when the tool breaks the chip in smaller pieces, preventing the chip from being jammed, which typically occurs during tapping.

Published: 12/4/2019

Dormer Pramet Expands its Line of Milling Tools for Die and Mold
A strong main cutting edge is said to enable a high durability and process security, especially when machining corners inside a pocket. 

Published: 12/3/2019

Walter's HU5 Universal Geometry Improves Metal Removal in Tough Materials
The HU5 has a larger seating surface than double-sided negative inserts. This is said to increase stability and enable deeper cutting depths, feed rates and metal removal rates.

Published: 12/2/2019

Dormer Pramet's SNGX11 Insert Enables High-Feed Milling in Steel
The double-sided SNGX11 insert from Dormer Pramet is capable of high-feed milling with a depth of cut ranging to 0.07".

Published: 12/2/2019

PCBN Inserts from Kennametal Make Hard Turning More Cost-Effective
Kennametal’s KBH10B and KBH20B grades, designed for hard turning, are available in double-sided inserts for materials as hard as 65 HRC. 

Published: 11/23/2019

Ibag Micro Spindle Converter Operates Two Spindles Simultaneously
Ibag’s micro spindle converter enables space-saving and improved control of spindles, the company says.

Published: 11/18/2019

Horn's Supermini Gets an Insert Geometry for Drilling, Boring, Face Turning and Skimming
Designed for the Supermini tool system, Horn’s HP geometry is suitable for drilling, boring, face turning and skimming.

Published: 11/12/2019

Replaceable Head Drill Body Expansion for Large-Diameter Drilling
Existing body options—3xD, 5xD and 8xD—have been expanded with a 12xD for deep hole applications and a 1.5xD for improved rigidity in shallow hole and plate drilling.

Published: 11/11/2019

Walter's M4791 Routing Cutter Can Be Used on Lathes and Machining Centers
Walter USA has expanded its M4000 milling cutter line with the M4791, a routing cutter capable of plunging in solid material and producing a true flat bottom.

Published: 11/11/2019

Automatic Tool Changer for Dual-Drive Press Brakes
MC Machinery Systems’s high-capacity automatic tool changer for its BH series of dual-drive press brakes is designed to increase production levels and utilization rates while reducing setup time, especially in high-mix, low-volume environ...