Exploring the: Deburring Zone

20 Results for: Blog

Sort by:
Published: 5/7/2020

High-Energy Barrel Finishers Efficiently Deburr Complex Parts
Mass Finishing Inc. has developed high-energy barrel finishers that automate the process of deburring complex parts, saving time and eliminating the need to deburr parts by hand.

Published: 2/28/2020

Debunking the Deburring Process
A car manufacturer struggled with a complex and unreliable deburring process for its crank case production line until it was introduced to a tool designed specifically for cross-bore deburring.

Published: 1/13/2020

Deburring Difficult-to-Machine Materials
A wheel brush with nylon filaments that will not break off or deform can remove burrs from hard materials, such as 4140 steel. 

Published: 1/7/2020

Shop Hands Over Gear Deburring to a Robot
Manual deburring of gears was an odious task for many of Katsa’s machinists, which in turn created a bottleneck that caused delays. The solution: a custom robotic deburring cell from Flexmill relying on Renishaw’s RMP60 pr...

Published: 11/26/2019

Drilling and Chamfering Tool Solves Machine Shop's Vexing Problem
An oil & gas part with a lot of holes required that Utex use two different tools to ensure burr-free inner and outer diameters. With Heule’s Vex-S tool, the shop realized time savings per cycle of an entire minute by performing drilli...

Published: 7/22/2019

4 Considerations for Electropolishing Machined Parts
Manufacturers considering this non-contact finishing process should expect test runs and close collaboration with service providers before production begins.

Published: 5/16/2019

Burr-Free Micro Thread Whirling
Threading is usually the last operation when machining components, which is why the process needs to be reliable and highly precise. DC Swiss has developed an internal thread whirler, which leaves micro threads burr-free, even in demanding, hard-to-...

Published: 4/23/2019

April 2019 Product Spotlight: Cleaning and Deburring
This month’s Modern Equipment Review Spotlight focuses on equipment used to remove imperfections from and clean finished workpieces.

Published: 4/17/2019

Automated Deburring Made Simple
With its X-Bores series of deburring tools, Switzerland-based Heule has developed solutions for the automated deburring of cross bores.

Published: 11/24/2018

November 2018 Product Spotlight: Cleaning and Deburring
This month’s Modern Equipment Review Spotlight focuses on equipment used to finish parts by removing burrs, oils and other contaminants.