Gear Production

Exploring the: Gear Production Zone

146 Results for: Product

Sort by:
Published: 2/12/2015

Software Eases Milling of Gears, Splines
Sandvik Coromant’s InvoMilling 1.0 software enables flexible manufacturing of gears and splines on universal five-axis machining centers.

Published: 2/11/2015

Analytic Inspection System for Gears and Gear-Cutting Tools
Gleason’s 175GMS analytical gear inspection system offers complete inspection of automotive, aerospace and other smaller gears, as well as gear-cutting tools and non-gear parts.

Published: 2/10/2015

Multitasking CNC Lathes Minimize Noncutting Time
Okuma’s Multus U series multitasking CNC lathes are capable of gear machining, skiving and hobbing operations.

Published: 2/9/2015

Non-Contact Probe Enables Force-Free Measurement of Gear Profiles
Hexagon Metrology’s HP-O non-contact scanning probe is intended as an alternative to tactile analog measurement and scanning probes, and is well-suited for scanning large parts and those that are rotationally symmetric.

Published: 2/6/2015

Dry-Cut Hobbing Machine for Small-Diameter Gears
An addition to its GE series of dry-cut hobbing machines, Mitsubishi Heavy Industries’ GE 10A is suitable for mass production of small-diameter gears such as those used in vehicle automatic transmission systems.

Published: 2/5/2015

Gear Hobbing Machine Reduces Cycle Times
Liebherr’s LC 100 gear hobbing machine is said to be capable of achieving chip-to-chip times of 3 sec.

Published: 2/4/2015

Gear Inspection System Features Active Air Suspension
Available from Kapp Technologies, the R&P Metrology RPG 3500DS gear inspection system is capable of measuring parts ranging to 3,500 mm OD or, optionally, 4,000 mm OD.

Published: 2/3/2015

Turning Center Capable of Gear-Cutting, Milling and Drilling
EMCO Maier’s Hyperturn 65 Powermill offers a spindle clearance of 1,300 mm along with a counter spindle to enable four-axis machining and a B axis with direct drive for five-axis simultaneous milling operations.

Published: 2/2/2015

Honing Machine Optimizes Gear Finishing
Available from German Machine Tools of America, the Präwema SynchroFine 205 HS gear honing machine features direct-driven, digitally controlled spindles for the tool and the workpiece, enabling precise, rigid synchronization.

Published: 7/17/2014

Large-Scale Grinders Promote Reproducibility
The Liebherr LGG 180 and 280 grinding machines use a one-table design and updated grinding head to quicken twist-free profile and generating grinding.