Scrap- and Fluid-Processing Solutions Increase Profitability

Designed to keep up with advances in automated chip and fluid processing, PRAB offers systems for processing metal scrap and spent fluids as well as treating oily wastewater for recycle and reuse.

High-Pressure Coolant System Automatically Adjusts Volume

MP Systems’ VR8 variable-volume, high-pressure coolant system is part of the company’s VR series.

Oil & Gas

Turbine-Style Mist Collector Filters Water-, Oil-Based Coolants

Micronfilter USA’s Microil series of turbine-style mist collectors are designed for use on machine tools using water-based or whole oil-based coolants.

Coolant Filtration Kit Applicable to Chip Conveyors

LNS America’s cyclonic coolant filtration kit is designed to extend coolant life and reduce disposal costs by removing fine chips from the fluid before returning it to the machine tool tank.

Back-Facing Air Gun Cleans Debris from Internal Diameters

Exair's soft grip back blow safety air gun delivers a blast of air to blow debris and liquids from internal part features including pipe and hose interior diameters, channels, bores, holes and internal threads.

VR8 High Pressure Coolant System Extends Machine Tool Life

MP Systems’ VR8 variable volume high pressure coolant system (HPCS) can extend machine tool life, improve part quality, and reduce cycle time, and is part of a line of HPCSs the company launched in late 2016.

Filtration Technology Separates Dirty and Clean Oil

Vomat’s full flow filtration technology separates dirty and clean oil and provides cleaned cooling lubricants to NAS 7 (3-5 μm) standards, allowing coolant to remain longer in the system than in conventional filter systems. 

Sump Cleaners Minimize Machine Tool Downtime

Eriez HydroFlow sump cleaners are designed to provide effective, thorough and quick machine cleaning to maintain plant productivity and minimize machine tool downtime.

Vortex Tubes Put a Cool Spin on Dry Machining

This technology offers an alternative to traditional liquid coolants by providing a clean stream of air as cold as -30°F to cool cutters and workpieces during machining.

Coolant Systems Offer Alternative to Edge-Type Filtration

Eriez HydroFlow’s Coolant SuperFiltration systems remove particles down to 3-micron nominal from cutting fluid while maintaining a stable fluid temperature and offer an alternative to edge-type filtration in oil applications.