Milling Tools

Exploring the: Milling Tools Zone

49 Results for: Case Study

Sort by:
Published: 11/15/1999

Aerospace On A Diet
The difficulty of close tolerance finishing in both high temperature alloys and titanium is particularly real in the Aerospace industry, where thinwall construction is becoming more common. Read how an insert gave this shop an edge.

Published: 12/15/1998

Ohio Manufacturer Cuts Milling Time By 75 Percent
Oren Elliott Products, Inc. is located in Edgerton, Ohio near the Indiana border. It is a large North American supplier of air-dielectric variable capacitors, which are used in such diverse applications as magnetic resonance imagery equipment, mass ...

Published: 1/1/1998

Tooling Partnerships Key To Rapid Growth
It is through partnerships with tooling vendors that this growing shop feels it can best position itself to provide the kind of service its customers require.

Published: 1/1/1998

Fine Pitch Cutter Increases Milling Productivity
This 120 year-old manufacturer to update its manufacturing processes and expand its product offering so it could become a sole-source supplier for its customers in the steam industry.

Published: 10/1/1997

Tool And Die Shop Doubles Throughput On Steel Tubing Grooving
With their conventional high-speed steel milling cutters, this shop experienced a series of problems producing critical axial grooves in steel tubings.

Published: 7/1/1997

Improving Milling Throughput By 50 Percent With 'Wrong' Insert
This company will save at least $87,500 per year by changing over to positive rake cutter and inserts for milling a family of ductile iron couplings. Cycle time per part has dropped one third, elevating production from four to six parts per hour.

Published: 3/1/1997

Inserts Improve Milling Of Tough Steel Castings For Missouri Manufacturer
When a Laurel, Missouri manufacturer of industrial equipment identified problems in their two machining operations on high alloy steel casting, they solved them with an insert and a cutter switch.

Published: 1/1/1997

Shop Standardizes On Cutter For All Of Its Face Milling In Steel
This 20-year-old contract shop is focused on short-run machining of large structural cast iron and hotrolled steel components for special machine tools.

Published: 4/1/1996

Mold Maker Profits By Teaming With Tooling Company, Distributor
Productivity is up by 15 percent, tool life is up 20 percent and part cost is down 20 percent for face milling, drilling and boring operations at Engel Machinery Inc., York, Pennsylvania.