Workholding

Exploring the: Workholding Zone

712 Results for: Product

Sort by:
Published: 11/13/2018

Power Chuck Reduces Setup Times
Röhm Products of America’s Duro-A RC power chuck reduces setup times because of its jaw-change system that is said to enable the jaws to be adjusted, reversed or swapped in 50 seconds.

Published: 11/6/2018

Clamping System Mounting Enables Five-Sided Machining
Carr Lane Roemheld’s DropZero modular zero-point clamping system is said to enable a user to machine a workpiece in one setup.

Published: 10/25/2018

Hard-to-Find Pitches Added to Soft Top Jaw Lineup
A major facilities upgrade now enables Dillon Chuck Jaws to add the manufacture of serrations of 2 mm × 60 degrees and 2.5 mm × 60 degrees for hard-to-find top jaws, hard jaws and full grip jaws that fit the corr...

Published: 10/15/2018

Welding, Assembly Clamps Useful in Automotive, Aircraft Industries
Destaco has launched its TCC-2E series of tolerance compensation clamps (TCCs) designed to provide greater flexibility in welding and assembly applications that require the clamping of components of differing thicknesses or tighter to...

Published: 10/12/2018

Air Rest Buttons Detect Proper Workpiece Loading
Carr Lane’s air rest buttons enable the use of pneumatic position control to detect proper workpiece loading in a machining fixture.

Published: 10/8/2018

Jaw Nuts Minimize Jaw Change Time
Dillon Fast-Trac jaw nuts are designed to convert standard chucks into quick-change chucks, reducing jaw change time by as much as half.

Published: 9/25/2018

Modular Vise Clamps Two Workpieces
The Hoffmann Group has released a module for its Garant Xpent five-axis vise.

Published: 9/13/2018

Workholding System Increases Vacuum Surface Area for Mill Fixtures
Technical Tooling’s Vacu-Grip composite workholding system vacuums mill fixtures by using a granular media technology that configures to any complex three-dimensional shape.

Published: 9/1/2018

Workholding Enables Stress-Relief Reclamping
IMTS 2018: The Schunk Vero-S Aviation product line is designed to rigidly clamp large parts accurately and enable the user to release the part enough to allow the part to move (compensate) due to the stresses of machining without full...

Published: 8/29/2018

Fixturing Components Improve Range of Applications
IMTS 2018: Fixtureworks offers a lineup of bearing wheels, indexing plungers and TG GripSert inserts.

Self centering vise is a cost effective and universal workholding method for five sided machining.