Exploring the: Workholding Zone

377 Results for: Product

Sort by:
Published: 12/11/2018

Quick-Change Jaw System Adapts to Various Jaw Lock Dimensions
Huron Machine Products has released the System 3 quick-change jaw system, improving changeover time and minimizing cost for the chucking of various small and large parts.

Published: 12/11/2018

Hard Jaws Center and Grip Equally
Hard jaws from Dillon are designed to center the workpiece and grip it equally with each jaw.

Published: 11/22/2018

Self-Centering Vises Prevent Lift
Jergens Inc.’s vises for multi-axis machining productivity are available in 75 mm and 130 mm with varied mounting options.

Published: 11/21/2018

Collet Pad Jaws Shorten Cycle Times
Collet pad top jaw systems from Dillon Manufacturing enable more aggressive machining to shorten cycle times while providing consistent repeatability.

Published: 11/13/2018

Power Chuck Reduces Setup Times
Röhm Products of America’s Duro-A RC power chuck reduces setup times because of its jaw-change system that is said to enable the jaws to be adjusted, reversed or swapped in 50 seconds.

Published: 11/6/2018

Clamping System Mounting Enables Five-Sided Machining
Carr Lane Roemheld’s DropZero modular zero-point clamping system is said to enable a user to machine a workpiece in one setup.

Published: 10/25/2018

Hard-to-Find Pitches Added to Soft Top Jaw Lineup
A major facilities upgrade now enables Dillon Chuck Jaws to add the manufacture of serrations of 2 mm × 60 degrees and 2.5 mm × 60 degrees for hard-to-find top jaws, hard jaws and full grip jaws that fit the corr...

Published: 10/15/2018

Welding, Assembly Clamps Useful in Automotive, Aircraft Industries
Destaco has launched its TCC-2E series of tolerance compensation clamps (TCCs) designed to provide greater flexibility in welding and assembly applications that require the clamping of components of differing thicknesses or tighter to...

Published: 10/12/2018

Air Rest Buttons Detect Proper Workpiece Loading
Carr Lane’s air rest buttons enable the use of pneumatic position control to detect proper workpiece loading in a machining fixture.

Published: 10/8/2018

Jaw Nuts Minimize Jaw Change Time
Dillon Fast-Trac jaw nuts are designed to convert standard chucks into quick-change chucks, reducing jaw change time by as much as half.