Showcasing the Benefits of Some Oft-Overlooked Grinders
Brent Donaldson of Modern Machine Shop sits down with Supertec's Don Staggenborg to discuss what the IMTS veterans brought to this year's show.
Although its origins extend even farther back, Supertec Machinery was established in 1997 in Paramount, California. With its decades of experience, Supertec turns to the future where it says it continues to invest in sustainable manufacturing operations.
Every year since 1998, Supertec has exhibited in the IMTS Grinding Pavilion. Brent Donaldson, executive editor of Modern Machine Shop, sat down with Don Staggenborg, sales manager of Supertec Machinery, to discuss what these IMTS veterans are bringing to the show this year.
Brent Donaldson, executive editor of Modern Machine Shop: What are attendees going to see in your booth this year?
Don Staggenborg, sales manager of Supertec Machinery: We've got two machines that we're going to show that are out of the mainstream for grinding when they shouldn’t be. They're few and far between here [in U.S., Canada and Mexico operations], but in the rest of the world, especially in Europe and Taiwan, they’re more prevalent, or at least, that's my experience. The first one is a double disc grinder. It enables grinding on two sides of the part at the same time, basically.
BD: Given these are uncommon, what industries do you think could find the most use for the double disc grinder?
DS: The one where utilization is key is the bearing industry. They grind both sides of a bearing race simultaneously. When done with a double disc grinder, it gives you good parallelism. Double disc grinders are a little unusual, but we’re going to showcase them and bring more awareness to their benefits.
BD: You said you were featuring two machines. What’s the second?
DS: The other highlighted machine in our booth is what we call Mini Genie. It’s a CNC cylindrical grinder designed with a very small footprint. By small footprint, I’m talking 78 inches by 78 inches. It’s meant for job shops or shops that don't have a lot of floor space. We hear that a lot: “Well, I need a machine, but I don't have much space to put it.” Today, space is a big problem for a lot of shops; they need it, but it won’t fit. This is designed with that in mind. It’s meant for small shop types of situations and applications, and we really want to show that.
BD: So, let's get into that a little bit. Are there multiple model types?
DS: The actual overall models are called Mini Genie, and there’s two types of models, the 2020 and 2520. Basically, Mini Genie comes in an anglehead model [model A] and a plunge model [model P] where the wheelhead is at 20 degrees or at 90 degrees respectively. The one on display at IMTS is the Mini Genie 2020P, plunge model.
BD: Does the Mini Genie have any other stand-out features?
DS: One of the highlights other than its size is the direct drive on the Z-axis for faster acceleration and deceleration. With that kind of direct drive system, there’s little backlash, so tighter tolerances and more accurate parts are a result. Mini Genies also have iGrind, our programming software.
Related Content
Building an Automation Solution From the Ground Up
IMTS 2022 provides visitors the opportunity to meet with product experts to design automation solutions from scratch.
Read MoreNASA Brings Technology to New Heights
Meet NASA mission system engineer Mike Menzel and learn more about the James Webb Space Telescope at Mitsui Seiki USA’s booth (338700) in the South Hall from 11:00 a.m. to 11:45 a.m. on Thursday, September 15.
Read MoreBall-End Tool Contours, Chamfers and Finishes in One Pass for Most Materials
The new IMCO Carbide Tool Pow•R•Arc end mill, to be shown at IMTS 2022, emphasizes speed. The cutter is able to run and increase feed rates to machine one’s mold up to five times faster than a four-flute tool.
Read MoreCombination Lathe Enables Both Manual, CNC Operations
IMTS22: Milltronics showcases its ML16II/40 combination lathe, as well as its VM3018IL performance vertical machining center.
Read MoreRead Next
3 Mistakes That Cause CNC Programs to Fail
Despite enhancements to manufacturing technology, there are still issues today that can cause programs to fail. These failures can cause lost time, scrapped parts, damaged machines and even injured operators.
Read MoreObscure CNC Features That Can Help (or Hurt) You
You cannot begin to take advantage of an available feature if you do not know it exists. Conversely, you will not know how to avoid CNC features that may be detrimental to your process.
Read MoreThe Cut Scene: The Finer Details of Large-Format Machining
Small details and features can have an outsized impact on large parts, such as Barbco’s collapsible utility drill head.
Read More