Presettable, Quick-Change Tooling System for Swiss-Type Lathes
PMTS 2019: Göltenbodt, represented in the United States by Schwanog LLC, introduces its presettable, quick-changeable and coolant-fed tooling system for Swiss-type automatic lathes.
Göltenbodt, represented in the United States by Schwanog LLC, introduces its presettable, quick-changeable and coolant-fed tooling system for Swiss-type automatic lathes. The system is said to speed and ease tool change-overs and to enable off-machine presetting with repeatability of 0.0004". The rigid design is said to benefit setup times and provide chatter-free operation, reliability and increased tool life.
The system is available in versions accommodating square shank sizes of 8, 12 and 16 mm (3/8", ½" and 5/8"). The system is designed to accept any known cutting tool brands. Coolant-fed holders are available with pressure ratings ranging to 1,500 psi.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
IMTS Takeaways From the Modern Machine Shop Editorial Team
The first in-person IMTS in four years left the MMS editorial staff with a lot to digest. Here are a few of our takeaways from the show floor.
-
Big Daishowa Chuck Eliminates Chatter in Milling Operations
The Mega 12DS chuck is designed for trochoidal milling with anti-vibration end mills.
