Portable VMC Streamlines Secondary Operations
Eastec 2017: Southwestern Industries will showcase the Trak 2OP, its portable VMC designed for secondary machining operations.
Southwestern Industries will showcase the Trak 2OP, its portable VMC designed for secondary machining operations. The company says the machine enables a shop to streamline workflow and maximize labor utilization through quick, easy access to an additional spindle wherever it’s needed. Engineered to be easy to learn, use and move, the Trak 2OP can enable the creation of work cells in a low-volume, high-mix shop.
The Trak 2OP increases productivity by enabling multitasking for operators who would otherwise be idle during the primary machine’s cycle time. In theory, this reduces part cycle times and increases output at zero additional labor cost. In addition to its use for secondary operations, the TRAK 2OP can also be used as a standalone VMC for simpler parts, freeing up more capable primary machines to complete more complex work.
The machine has a 2.5 × 4-ft. footprint, contains an eight-station automatic toolchanger and can run G code. Like all Trak machine tools, it uses the company’s ProtoTrak CNC technology with conversational programming. Programs can be generated either at the machine or remotely to perform tasks normally associated with secondary operations.
Related Content
-
SMEC America Showcasing Machines' Reliability and Rigidity
SMEC America is running demonstrations on its machines both old and new at its IMTS booth, with engineers on hand to help answer questions.
-
Vertical Lathe Executes Heavy-Duty, Long and Continuous Cutting
New VT1000EX Vertical Lathe from Okuma America Corp. possesses the capability to cut and machine difficult materials through, according to Okuma, its highly rigid, mechanical configuration, extreme thrust and torque.
-
Heavy Engineering: The Complex Logistics of Moving Large Machine Tools
One of our fascinations with large-format machine tools has little to do with their capabilities, but everything to do with the logistics involved with getting them up and running. Here’s how one of the world’s oldest builders of giant machine tools tackles the challenge.