New Generation Of Steel Turning Grades
Sumitomo’s next generation of P20 and P30 coated carbide turning grades include the AC820P, which is designed for general-purpose turning of steels and stainless steels and the AC830P, which is designed for interrupted cuts and roughing. The Super FF coating provides wear and breakage resistance while increasing tool life.
Sumitomo’s next generation of P20 and P30 coated carbide turning grades include the AC820P, which is designed for general-purpose turning of steels and stainless steels and the AC830P, which is designed for interrupted cuts and roughing. The Super FF coating provides wear and breakage resistance while increasing tool life.
Related Content
-
Selecting a Thread Mill That Matches Your Needs
Threading tools with the flexibility to thread a broad variety of holes provide the agility many shops need to stay competitive. They may be the only solution for many difficult materials.
-
A New Milling 101: Milling Forces and Formulas
The forces involved in the milling process can be quantified, thus allowing mathematical tools to predict and control these forces. Formulas for calculating these forces accurately make it possible to optimize the quality of milling operations.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
