• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
3/4/2009

Addition to Toolholder Line

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Groove n’ Turn toolholders offer a new holder available in 1/2", 5/8", 3/4" and 1" diameters. It has a 1. 250" minimum bore and holds inserts with cutting depths to 0.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Groove n’ Turn toolholders offer a new holder available in 1/2", 5/8", 3/4" and 1" diameters. It has a 1.250" minimum bore and holds inserts with cutting depths to 0.500". Toolholders can be used on conventional, Swiss and CNC machines for ID threading inserts and grooving inserts in sizes from 0.004" to 0.155". Inserts are available in three grades of material: D2 for steels, D5 for nonferrous and HSS. TiN, TiCN, TiAlN are available. A full selection of radius and special configurations are also available.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Modern Machine Shop in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Measuring Taper For Toolholders And Spindle Applications

    Companies concerned about strict quality requirements regularly check toolholder tapers for wear or inaccuracy because these conditions can jeopardize the results of a critical operation. However, a shop can check tapers quickly and reliably with air gages. These devices can be used effectively without special operator training. For measuring taper in a production environment, few other methods can match the speed and performance of air, as multiple-circuit air jets can be placed in very small taper gages.

  • Five Key Concepts Of Modular, Quick-Change Tooling

    A tooling system consisting of interchangeable cutting units and standardized locking units has a lot to offer users of CNC machines, whether for turning, milling, or both on a turn mill. These guidelines will help you think clearly about how modular, quick-change tooling can benefit your shop.

  • The Humble Pull Stud

    I’ve said that the toolholder is the least appreciated element in many milling processes, but the pull stud (or retention knob) is perhaps the least appreciated component of the toolholder.

Related Topics

Resources