| 1 MINUTE READ

Thread Milling Information Offered

Carmex Precision’s 2013 catalog is designed to be an introduction to thread cutting as well as a product selection tool.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Carmex Precision’s 2013 catalog is designed to be an introduction to thread cutting as well as a product selection tool. The publication features product details as well as technical information, software references and other resources for thread milling and turning. It is available as a hard copy or as a free download on the company’s website.

RELATED CONTENT

  • Choose The Best Drill Point Geometry

    The more common twist drill point geometries often are not the best for the job at hand. By choosing the best point for the material being drilled, it is possible to achieve better tool life, hole geometry, precision, and productivity.

  • Machining Dry Is Worth A Try

    Reducing cutting fluid use offers the chance for considerable cost savings. Tool life may even improve.

  • Taking The Fear Out Of Hard Turning

    To make the transition to hard turning, you'll need to switch from carbide to CBN inserts, but that is easier (and more economical) than you might think. It's making the jump to much higher surface speeds that might scare you off. It needn't. Here's why.