• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
4/17/2012

Enclosed, Wet Benchtop Saw for Manual Operation

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Kalamazoo Industries’ model K10WBT is an enclosed, wet-cutting benchtop abrasive saw designed for economical manual operation.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Kalamazoo Industries’ model K10WBT is an enclosed, wet-cutting benchtop abrasive saw designed for economical manual operation. The 10"-diameter abrasive blade (not included) can cut solids ranging to 1.5" and pipe ranging to 2.5". The saw features a magnetic switch; an internal work light; dual 3" vises; dual coolant nozzles with coolant and pump; a T-slot table; a 2-hp, three-phase, 220/440-V TEFC motor that runs at 3,450 rpm at the spindle; and 5/8" LH spindle arbor. An optional 1.25" (32 mm) spindle arbor is available. The entire saw measures 24" in all dimensions. 

RELATED CONTENT

  • Vertical Grinding Has Advantages

    In vertical grinding, the workpiece is held upright in a rotary chuck with the grinding spindle overhead. This configuration can improve roundness, facilitate single-setup processing and prolong the life of the machine. Loading and unloading may gets easier, too. Workpieces with relatively large diameters and short lengths benefit the most from vertical grinding.

  • Creep-feed Grinding Is A Milling Process

    Because creep-feed grinding is essentially a milling process, why not use a VMC? A grinding machine supplier describes how a VMC platform can make creep-feed grinding more effective.

  • Advanced Grinding, Plain and Simple

    Advanced grinding equipment gives this shop the flexibility and automation it needs to serve customers with either rapid-response or high-volume jobs.

Related Topics

Resources