• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
12/21/2018

Jet Coolant Nut Directs Fluid to Cutting Edge in Micromachining

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Big Kaiser’s Mega micro coolant nut is said to provide precise coolant supply to micro cutting tools applications at high speeds when using the Mega micro chuck 6S.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Big Kaiser’s Mega micro coolant nut is said to provide precise coolant supply to micro cutting tools applications at high speeds when using the Mega micro chuck 6S. The coolant nut is designed for high-speed micromachining of parts with diameters ranging to 6 mm. The company says that the micro nut optimizes milling performance and increases tool life compared to standard nuts.

Without precision coolant, chip jamming can be a problem, causing machine stoppages, service callouts, increased tool wear and poor surface finish, the company explains. The company says that the Mega micro coolant nut is designed to prevent such challenges and get the coolant to the cutting tip.

RELATED CONTENT

  • Too Small To Touch

    Hummingbird takes on machining work that is too small for most shops to handle. In fact, Hummingbird tries not to handle it either. To accurately machine the tiniest parts, this shop relies on processes that are as hands-off as possible.

  • Micromachining Evolution

    Challenge Machine continues to add high-speed equipment for the increasing amount of micromachining work it is performing. Here are some lessons it has learned along the way, using tools as small as 0.001 inch in diameter.

  • Non-Traditional Methods For Making Small Holes

    Consider these alternatives when conventional drilling can't do the job.

Related Topics

Resources