SUBSCRIBE

Magazine | eNewsletter

  • MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter

Parts Cleaning Conference 2020
4/13/2010

Stainless Steel Parts Washer Features Modular, U-Bend Design

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The company’s PWRB9-36EU aqueous parts washer is designed for precision cleaning of large metal parts and large batches of smaller parts.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Read Next

Related Suppliers

 

Almco’s PWRB9-36EU aqueous parts washer is designed for precision cleaning of large metal parts and large batches of smaller parts. Constructed entirely of stainless steel, the unit features a compact, U-bend design to enable a single operator to load and unload parts from one location. Other features include rinse and blow-off capabilities and modular construction, which facilitates adding various stages as-needed to suit user requirements. 
 
A 9"-wide, flat-wire belt carries individual parts or batches of parts through the system. Parts are cleaned with a heated solution that is sprayed from adjustable nozzles at the top, bottom and sides of the 36"-long cleaning chamber. Built-in cyclonic filtration equipment recycles liquids for reuse and for environmentally safe disposal of solid particles and floating matter.

RELATED CONTENT

  • For Laser Shops: Oxidation Retaliation

    In an effort to prevent field paint failures, OEMs can no longer accept parts with the oxide buildup. A mechanical means of removal such as hand buffing or grit blasting is commonly practiced. However, these time-consuming and often labor-intensive processes can represent a substantial expense, and they can also introduce inconsistencies.

  • April 2019 Product Spotlight: Cleaning and Deburring

    This month’s Modern Equipment Review Spotlight focuses on equipment used to remove imperfections from and clean finished workpieces.

  • Water-Based Rust Solution Boosts Productivity

    Rust and corrosion can be problematic when working with cold rolled steel (CRS). Despite even the most heroic preventive measures, manufacturers report troublesome, rusty parts that can be attributed to seasonal humidity, being located near bodies of salt water, long-term indoor storage, unprotected shipping methods, condensation and coolant residues.


Related Topics