Vektek Debuts Clamps With Patented Design
Westec 2021: Vektek's Twin Lever Link Clamp allows users to clamp two parts simultaneously or to clamp through a part opening on two sides. It features a rotary lug with 360 degrees of lever/body positioning.
Vektek announces the Screw-In Cartridge Mount Twin Lever Link Clamps, which the company will showcase at Westec 2021, booth 1644.
According to Vektek, this new design is made possible with its patented rotary lug, which delivers 360 degrees of lever/body positioning. The screw-in cartridge mount body reportedly minimizes the clamp footprint and saves space on the fixture.
Vektek says the Twin Lever Link Clamp allows for clamping two parts simultaneously or for clamping through a part opening on two sides. Vektek’s pivot equalizing system applies equal clamping force through both levers on surfaces that are within .06”. The upright position of the levers gives clearance for easy part loading and unloading.
Vektek says using the clamp is straightforward; simply machine a cavity, drill feed passages and screw-in the threaded link clamp body and torque. After positioning the rotary lug, pressure the clamp on the part and lock it in position by tightening the set screws.
Related Content
-
Machining Vektek Hydraulic Swing Clamp Bodies Using Royal Products Collet Fixtures
A study in repeatable and flexible workholding by one OEM for another.
-
An Additive Manufacturing Machine Shop
Finish machining additively manufactured implants requires different pacing and workflow than cutting parts from stock — different enough for an experienced manufacturer to warrant a dedicated machine shop.
-
Moving To Magnets Doubles Productivity
Moving from hydraulic to magnetic fixtures enabled this shop to reduce setup time, improve rigidity and eliminate manual operations. As a result, productivity doubled.