YG-1 Launches New Platform of Cutters and Inserts
YG-1’s FM10 PNMU inserts are designed to separate the cutting edge and the wiper, which results in ten true cutting edges.
YG-1’s newly introduced FM10 PNMU face milling indexable inserts combine multi-corner face milling performance with high feed capabilities.
The FM10 PNMU inserts are designed to separate the cutting edge and the wiper, which results in ten true cutting edges.
The 36 degree entry angle reportedly generates thinner chips, providing operators higher feed capabilities. The curved cutting ridge and wiper design is engineered to reduce cutting forces and directs these forces axially along the strength of the machining center into the spindle. According to YG-1, these advantages optimize operational stability to provide users superior surface finishes and greater productivity.
YG-1 recommends FM10 PNMU cutters and inserts for milling in steel and cast iron. Now available in the U.S. and Canada, the cutters and inserts can be ordered in diameters of 2" to 4". YG-1 says it is developing an expanded range of diameters as well as extending the line for face milling in stainless and other materials.
Related Content
-
A New Milling 101: Milling Forces and Formulas
The forces involved in the milling process can be quantified, thus allowing mathematical tools to predict and control these forces. Formulas for calculating these forces accurately make it possible to optimize the quality of milling operations.
-
Five-Axis Changes Weldments Into Monolithic One-Piece Parts
Moving from welding to five-axis machining enabled Barbco to redesign its weldments as monolithic one-piece parts with improved strength and repeatability.
-
Tungaloy Expands Line of Barrel-Shaped End Mills
The new SolidMeister barrel end mills are efficient tools for complex 3D-surfacing operations used in mold making, orthopedic implants and the machining of other freeform surfaces.