6/1/2019 | 2 MINUTE READ

Center of Excellence Is New Twist on Old Manufacturing Department Structure

Originally titled '‘Center of Excellence’ is Both Like and Unlike the Old Divisions'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The new Spirit AeroSystems facility for five-axis machining allows a small team to oversee a significant amount of machining capability. Is this the way of the future as machining systems become more automated?

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

There was a time when machine shops were routinely organized by operation. There were separate departments for turning, milling, grinding and so on. The arrangement was meant to bring together people who were alike in their specialization by equipment type. By contrast, cross-training and diverse equipment are more valued in shops today. Though similar machines might locate near one another, a variety of machines fill the shop, and employees are valued for their ability to engage across that variety.

Yet Spirit AeroSystems is going a different way, at least partially.

On a tour of the company’s manufacturing campus in Wichita, Kansas, I got to visit its newly opened Five-Axis Machining Center of Excellence. A similar center for three- and four-axis work is in Oklahoma. These facilities bring like machining capability together, along with people dedicated to this capability. The sense of concentration at the Witchita center was clear: It was just five-axis and nothing else. Is this a step backward?

Actually, no. It is an advance in line with ways machining technology is advancing. It may even offer a glimpse of the way machine shops will routinely operate not far in the future.

A striking contrast illustrates the center’s value. The Wichita site is expanding. It makes commercial aircraft fuselages (among other aircraft systems), and though one major plane model has seen an unexpected decline in orders this year, the trend overall for Spirit has been a challenge to increase production, and therefore increase personnel. The company had aimed to add 1,000 new employees this year (unknown whether recent events affect that plan). Yet here is the contrast: The personnel needs of the new five-axis center are slight by comparison. There are various types of five-axis machines here, but much of the machining is performed on two integrated pallet cells consisting of six Makino Mag 3 machining centers apiece. The cells each require one operator per shift, for a total of six operators, with three more providing buffer. Therefore, nine operators are enough to staff the two cells’ 12 machines around the clock. Suffice it to say, of the 1,000 new hires, few or none will be needed on these cells.

The center of excellence concept creates capacity, most basically in floor space. Concentrating five-axis into one place is more space-efficient than the previous arrangement of dispersed five-axis capability. It also creates productive capacity because the five-axis specialists assembled here now have an easier time coordinating to address challenges. Moreover, they can give their attention to more machines apiece. There are many more people here than just those on the pallet cells, but still, the team here is few but mighty. And Spirit AeroSystems is poised to capitalize on that might. One reason for increasing capacity is the company’s hope to raise contract machining alone into a $1 billion business.

Relatively few manufacturers will have the chance to invest in a six-machine cell on the order of what this site has, let alone more than one of them. But increasingly automated systems are the reality of almost any shop that is continuing to update its technology. In a shop with ever more automation, the challenge is to see just how much machining capacity a knowledgeable operator might be able to oversee and what arrangement will address this challenge best. The model of concentrating capability is therefore liable to make a comeback, but no longer as much for the sake of bringing together people doing similar work. That’s part of it, but the benefit now is much more about bringing all the equipment and capability together around these people.  

RELATED CONTENT

  • Tool Considerations for High Speed Cutting

    Fast CNC processing and high-pressure coolant contribute to removing metal at dramatic rates. But what should a shop know about cutting tools in high speed machining?

  • An Overview Of 3 + 2 Machining

    You don't have to use all five axes of a five-axis machine at the same time to get great benefits. Here's what 3 + 2 can do for you.

  • Composites Machining for the F-35

    Lockheed Martin’s precision machining of composite skin sections for the F-35 provides part of the reason why this plane saves money for U.S. taxpayers. That machining makes the plane compelling in ways that have led other countries to take up some of the cost. Here is a look at a high-value, highly engineered machining process for the Joint Strike Fighter aircraft.

Resources