• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
1/6/2010

Variable Center-Distance Multispindle Heads

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Distributed by Tapmatic, OMG’s variable center-distance multispindle heads include the T series, the VH series and the TSI-TSX series.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

 

Distributed by Tapmatic, OMG’s variable center-distance multispindle heads include the T series, the VH series and the TSI-TSX series. Designed for drilling and tapping machines, the T range includes heads that can drill to depths of 22 mm and tap up to M16, with a maximum of 26 spindles. According to the company, the heads are easy to use and increase machine output.
 
The VH series features a gear drive inside the head to enable speeds of 4,000 rpm, drilling depths ranging to 25 mm and tapping ranging to M20. The body of the head is made of alloy aluminum and the gears and spindles are made of heat-treated, ground steel for increased precision and wear resistance. Available in 31 different models with two, three and four spindles or just one offset spindle, the heads’ center distances range from 12 to 300 mm. Custom fixed-center distance multispindle heads are also available for use on CNC machines.
 
The TSI-TSX series are two-spindle units designed for chamfering automotive gear teeth.

RELATED CONTENT

  • The Knob Problem

    The retention knob is an unmistakably critical component of the machining process. However, the tightening of the knob itself can lead to the toolholder not seating securely in the machine. You may be losing tool life to knob tightness without even knowing it.

  • Be Kind To To Your Collets

    Collet toolholders are too important to the machining process to use them incorrectly. Follow this simple advice.  

  • Don’t Forget The Drawbar

    The force that holds the toolholder in the machining center's spindle can weaken over time. If you haven't checked drawbar force in a while, this may be the weak link in your process.

Related Topics

Resources