turning and grinding workholding from SMW Autoblok
Published

Workholding, Workhandling and More

The company offers bar feeders, chip conveyors, coolant management systems, automatic workholding devices and oil mist collectors.

Share

Read Next

The company offers bar feeders, chip conveyors, coolant management systems, automatic workholding devices and oil mist collectors. Hydrobar Sprint 542 automatic bar feed changes over in less than 8 min. and feeds 12-ft. round, hexagonal or square barstock with diameters ranging from ¼" to 1 5/8" (5 to 42 mm). The compact, rigid frame is designed to damp vibrations and minimize stress for quality performance, the company says. The PLC PCD3 is equipped with Ethernet and USB connectivity for communicating with the lathe PLC. It features a remnant retraction system, an automatic front stabilizer, automatic bar selection fingers and a menu-driven, prompting remote control.
 
The Turbo MH500 filtering chip conveyor accommodates chip challenges including fines, broken, coarse and stringy chips of mixed materials. It removes dedicated and ferrous materials, cast iron, brass and aluminum from the coolant, filtering debris to 500 microns. The compact design uses minimal floor space, and it works with the original coolant tank provided with most hinge belt conveyors that have a tail height of 5.5" or more. It is suited for turning and small milling chips produced by Swiss machines.   

Related Content

  • Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success

    Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.

  • An Additive Manufacturing Machine Shop

    Finish machining additively manufactured implants requires different pacing and workflow than cutting parts from stock — different enough for an experienced manufacturer to warrant a dedicated machine shop.

  • Moving To Magnets Doubles Productivity

    Moving from hydraulic to magnetic fixtures enabled this shop to reduce setup time, improve rigidity and eliminate manual operations. As a result, productivity doubled.

turning and grinding workholding from SMW Autoblok
Paperless Parts
IMTS 2024
Gravotech
Gardner Business Intelligence
Castrol Robotics Solutions
OASIS Inspection Systems
MMS Made in the USA
turning and grinding workholding from SMW Autoblok