Suhner's EconoMaster Drilling Units Cut Various Light Materials

Suhner’s EconoMaster line of drilling units is designed for multiple materials such as light metal, wood, composite, plastic and foam.


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
Suhner EconoMaster

Suhner’s EconoMaster drilling units are suitable for multiple materials, including light metal, wood, composite, plastic and foam. The drilling unit features low power and air consumption, an adjustable motor housing, adjustable total stroke ranging to 4", a hydraulic feed control cylinder, a J33 taper spindle end, 0" to ½" drill chucks, electric front and rear position limit switches, a belt tensioner, and a chrome-plated quill.

Other features include adjustable feed stroke of ½" to 3"; 400-lb. thrust at 85 psi; operating pressures to 110 psi; TEFC/IP56 protection; standard 230V/460V power; concentricity of 0.002" TIR; speeds ranging to 9,600 RPM; and an air connection retract/advance of ¼" to 27 NPT.

EconoMaster drilling units can be supplied with an adjustable stand, inline vertical configuration and a range of spindle and toolholder options.


  • Where Dry Milling Makes Sense

    Liquid coolant offers advantages unrelated to temperature. Forced air is the fluid of choice in this shop...but even so, conventional coolant can't be eliminated entirely.

  • Tips for Tapping Titanium Alloys

    Creating threaded holes in titanium alloys calls for proper techniques based on an understanding of both the properties of these materials and the peculiarities of the tapping process.

  • Machining Dry Is Worth A Try

    Reducing cutting fluid use offers the chance for considerable cost savings. Tool life may even improve.