Toolholders for a 30-60-Degree Angle

Groove ‘N Turn toolholders are available in 3/4" and 1" square and are used for making undercuts and thread reliefs at a 30-degree/60-degree angle.

Related Topics:

Groove ‘N Turn toolholders are available in 3/4" and 1" square and are used for making undercuts and thread reliefs at a 30-degree/60-degree angle. The toolholders can be used on conventional, Swiss and CNC machines for grooving inserts in sizes ranging from 0.004" to 0.150". Inserts are available in three grades: D2 for steels, D5 for nonferrous and HSS. TiN, TiCN, TiAlN are available. A full selection of radius and special configurations are available.

Related Suppliers

Editor Pick

Sandvik Coromant Silent Tools Plus Offers Connectivity

Sandvik Coromant’s Silent Tools Plus enables data from the machining process to be collected and sent to a dashboard.

RELATED CONTENT

  • How Do You Get The Cutting Parameters Right For Small End Mills?

    A reader recently asked about speed, feed rate and depth of cut when using small tools in steel.

  • Measuring Taper For Toolholders And Spindle Applications

    Companies concerned about strict quality requirements regularly check toolholder tapers for wear or inaccuracy because these conditions can jeopardize the results of a critical operation. However, a shop can check tapers quickly and reliably with air gages. These devices can be used effectively without special operator training. For measuring taper in a production environment, few other methods can match the speed and performance of air, as multiple-circuit air jets can be placed in very small taper gages.

  • Be Kind To To Your Collets

    Collet toolholders are too important to the machining process to use them incorrectly. Follow this simple advice.