• MMS Youtube
  • MMS Facebook
  • MMS Linkedin
  • MMS Twitter
12/22/2017

DMG MORI USA Appoints New President

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

James V. Nudo has been with the company for more than 14 years and previously served as executive officer.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

DMG MORI USA (Hoffman Estates, Illinois) has appointed James V. Nudo its new president. He has been with the company for more than 14 years, having previously served as executive officer of DMG MORI USA as well as of the international legal department and international human resources department for DMG MORI Co. Ltd.

Mr. Nudo was part of the team that was responsible for implementing the company’s joint venture. Under his direction, its mission will be to deliver customer service and machine tool technology through direct sales and strengthen its foundation in the United States. The company says it looks forward to integrating Mr. Nudo’s strategies for providing customer support while continuing to grow its existing relationships within the industry.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Modern Machine Shop in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • When Spindle Speed is a Constraint

    Though it won’t replace high speed machining, Boeing sees “low speed machining” as a viable supplement to higher-rpm machines. Using new tools and techniques, a shop’s lower-rpm machining centers can realize much more of their potential productivity in milling aluminum aircraft parts.

  • Drilling Deep Holes On A VMC

    The recipe for best results is simple: Start with a rigid machine, add a high pressure through-the-spindle coolant system, then combine these with the right drill geometry plus the right speeds and feeds.

  • An Overview Of 3 + 2 Machining

    You don't have to use all five axes of a five-axis machine at the same time to get great benefits. Here's what 3 + 2 can do for you.

Resources