5/2/2011

EDM, Five-Axis Milling Technologies

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The CUT 200 wire EDM is designed to provide faster spark-to-spark wire threading, increase energy efficiency and boost productivity when cutting parts of variable heights.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

The CUT 200 wire EDM is designed to provide faster spark-to-spark wire threading, increase energy efficiency and boost productivity when cutting parts of variable heights. The machine also offers higher flexibility through its ability to reliably hold tolerances measured in microns over a range of part sizes. It integrates the Power Expert smart module, which continuously calculates part thickness, checking flushing pressure and adjusting machine power accordingly. This prevents wire breakage when changing the part thickness being machined. The diesinking Form 20 will also be on display along with the HSM 400U LP, a five-axis, high-speed milling center and the Drill 20 high speed vertical drill. 

RELATED CONTENT

  • Anti-Electrolysis Developments In Wire EDM

    Originally, wire EDM had two things going against it. It was slow, and often it left an undesirable surface finish. In the last few years, wire EDM builders have fixed the speed problem. Now they're well on their way to fixing the surface finish problem.

  • Non-Traditional Methods For Making Small Holes

    Consider these alternatives when conventional drilling can't do the job.

  • Too Small To Touch

    Hummingbird takes on machining work that is too small for most shops to handle. In fact, Hummingbird tries not to handle it either. To accurately machine the tiniest parts, this shop relies on processes that are as hands-off as possible.

Resources